Jefferson County, WV · ZIP 25438
Mold Removal in Ranson, WV
Most of Ranson was built after 1990, so the mold here is rarely about age. It is about water: a slow leak, a basement holding summer humidity, a sump that failed. Measure the patch, find the source, and if it is bigger than about ten square feet, call.
For the owner of the property, or the person who approves work on it.
Three questions that decide what happens next
Ranson by the numbers
A July dew point in the mid-sixties means summer air in Ranson carries enough moisture to condense on anything cooler than about 64°F — a basement wall, a cold-water pipe, ductwork running through a crawl space. That is why so much of what people find here is below grade and shows up in late summer, not after a storm.
The other half is plumbing. Newer houses grow mold the same way old ones do when a supply line, a drain or a water heater leaks quietly behind finished drywall. EPA's guidance is to dry wet material within 24 to 48 hours; past that, growth is likely, and what shows on the surface is often the smaller part of it.
Census Bureau ACS 2020–2024, city of Ranson. NOAA U.S. Climate Normals 1991–2020, Martinsburg Eastern WV Regional Airport. West Virginia Bureau for Public Health licensing list.
How a call goes
What to have ready
Before you dial
- The area in square feet, measured, and a photo with a tape or a door frame in it for scale.
- Which part of the house: basement, crawl space, bathroom, attic, behind a wall.
- What got it wet, if you know — and whether that has been fixed.
- Roughly when the house was built. In Ranson that is often the late 1990s or later; in the old town blocks, much earlier.
- Your ZIP code, and whether you own the property.
Worth asking the contractor
- Your West Virginia contractor license number, and the business name it is under.
- Where you think the moisture is coming from, and whether stopping it is in the scope.
- How the work area will be closed off from the rest of the house.
- What will be removed, and how far past the visible growth.
- How you will show the material is dry before walls are closed up.
- Who carries the liability insurance, and can I see the certificate.
West Virginia has no mold license — so check something else
A company in Ranson that points to a state mold license is describing a credential West Virginia does not issue. What West Virginia does require is a contractor license from the West Virginia Contractor Licensing Board for residential jobs of $5,000 or more, and opening walls, replacing drywall and drying a basement can easily reach that.
The board publishes a public license search. Ask for the number and the business name, look it up, and make sure the name matches the one on the contract and the insurance certificate.
Common questions
Does West Virginia license mold remediation companies?
No. The state Bureau for Public Health licenses asbestos, lead and radon work, among others, but has no mold program. A 2026 bill to register mold remediation firms (HB 4351) was sent to committee in January 2026 and did not pass. Contractors doing residential work of $5,000 or more need a West Virginia contractor license.
Is this a mold removal company?
No. This site connects property owners with independent contractors by phone and may be compensated when that happens. It holds no contractor license and does no work.
Should I have the mold tested first?
Usually not. CDC does not recommend routine mold testing, and EPA says sampling is in most cases unnecessary where growth is visible. The decision — remove it and fix the moisture — is the same whatever species it turns out to be.
I rent my home in Ranson. Can I call?
The work has to be approved by the owner, so the first step is your landlord. West Virginia law requires landlords to keep rented homes fit and habitable; the page for renters explains how to report it in writing.
Questions people bring to the call
Measured it and found the water? Call to reach an independent contractor taking mold work in Ranson and Jefferson County.
Call Now — (888) 217-5292